More Furniture posted by on July 15, 2018

The popularity of such material as particle board, it seems, has no boundaries. It is used in all areas of construction and improvement of our lives. That is why such a procedure as cutting chipboard long ago is not the problem nor the production in large quantities, either in domestic and artisanal conditions for repairing or assembling furniture. But, nevertheless, saw cut chipboard – the process is rather labor-intensive and is associated with a lot of fine dust. But if the plant all completely solved, then at home and artisanal conditions difficult lined, well-sawed 30 sheets of particle board, and then after all still need to clean up after a mountain of garbage.

Much easier and faster to order sawing with the purchase. Now, this service widespread. This is done on professional equipment and in the shortest possible time. Types of Cutting Cutting Chipboard Chipboard is a preparation of solid particle board for various construction purposes or production of any interior and furniture. Credit: General Motors Company-2011. Straight-line sawing chipboard As the name implies, it is cut, which form a rectangular shape. For example, a sawing is used when manufacture of furniture rectangular shapes, or for the manufacture of flooring on the floor.

Curvilinear sawing chipboard This involves cutting the preparation of elements with curved shapes. It could be parts for the creation of original design furniture, and fragments of coatings for indoor non-standard forms. Mixed sawing chipboard There is also a form of cutting, combining the first two types. It is used when necessary Saw a figure as to the straight and curved lines. As sawing chipboard houses for those who are going to saw cpd at home, we say that it can be done any saw, but rather that she had small teeth. Cutting was more even, if Saw will have a very acute angle to the surface of the chipboard. At the same time keep it to gentle pressure, with little impact, it will avoid creases. Further protect the surface of adi can be pasted on the line cutting the tape. The most important is when cutting laminated chipboard. Most importantly, cutting chipboard abhors routine. Rushing can lead to the formation of chips. If, after the cut chipboard received exactly the slice, More treatment of such details would be required. If the edges are uneven, trim them to rasp, planes, or a file. During the cutting dps exposed inner layer plates, which may be subject to various deformations, so the edge after cutting needs extra protection. This can be done with plastic tape, the adhesive coating, or by using veneers, which also protects the chipboard from the troughs. Such an operation called – kromkovanie As you can see, sawing chipboard can be at home, but the qualitative result is better to turn to specialists. Particularly if it is not about a couple of details, but the cutting of a large amount of chipboard.