Paul Arnold

Classic or modern? It is impossible to answer unequivocally – it all depends on your taste and to your interior. Probably should not talk about that in a classic study of natural wood furniture in modern dance with brilliant chrome legs will look defiant. And vice versa. Despite the variety of manufacturers, design, usually repeated, taking up close selection of furniture, you will be surprised to find that "the exact same model I have seen elsewhere and in other tissues. " It is caused by things rather prosaic: First – plagiarism. Despite the fact that the word is not good, rip-off – one of the major driving force in the furniture business. A small extraordinary team of designers creating new solutions.

The rest of the furniture the public acquainted with the novelties of the international exhibitions and shamelessly copy them to your furniture. This is true not only of domestic manufacturers. Plagiarism – a worldwide practice. Most models of Italian, German, French, etc. factories average – this is the partial or total loan (it sounds a little better than plagiarism). Second, in Unlike furniture cabinet, which can be made to order for your sketches, furniture is usually not individually manufactured.

It is caused by technology features proizvodstva.Dlya to make good sofa, it is necessary to accurately calculate the shape of the frame, cushions and covers geometry. For a single-density polyurethane foam the size of the cover will be one for the other – a bit more. Otherwise, fabric or leather is not properly tensioned, the seam "move out" in the direction and etc., etc. For the development of the technology and construction of one model, the manufacturer may take a few months. Even a complete copy of furniture when bought imported bed, disassembled, carefully measured and copied to the smallest detail – is no guarantee that the sofa "will." As a rule, "get" only with third times. Because the foam used another brand (less dense or hard), other fabric ("runs" in a different way), another frame and other equipment and circuit assembly. What are the implications of the above can we do? Conclusion 1. Did you like the sofa from Italian firm "A", very beautiful, but very expensive? The same model (or very similar) can be found in another Italian (Spanish, French, German, Finnish or Polish) from "B" or domestic company "G", but at a more affordable price. The design will be the same. Another question is whether the same quality? (We are talking about Drawing models). Conclusion 2. If you expect that the sofa will be clear to the architect prepared niche width of 2,47 m, be aware that you have to buy a sofa 2.15 m, because the other sizes in model of your choice simply will not. In the resulting "hole" will have to put a vase or a small table. Therefore, to avoid embarrassing slips of the architect or designer, it makes sense to do a choice of furniture at the design stage.

Now, chipboard – a popular material used in the construction of various furniture, and for this there is considerable reason. And the moderate cost of DSP is not the main advantage of this material. By the way, after his appearance of this newfound material, the creators of furniture called the "perfect tree" because he held a variety of beautifully holds screws and nails, strong, uniform, easy-to-finish and can not be natural defects as a tree, what is characteristic of chips, twigs and rassyhanie of improper dressing and sbereganii. In furniture manufacture of chipboard panels produced furniture, which would then nibylo focus: children's furniture, for the home or office furniture industry. However, there is now a view that this affordable, efficient and durable material dangerously toxic – however, this is only an invention of duty. And this myth has come to us with long-Soviet period, despite the fact that the essence of the actual production process chipboard is constant, because anything which creates a plate of chips, what exactly is glued together with resin containing formaldehyde – To avoid that in the manufacture of particle boards would not recommend.

But it is impossible to compare the actual process in the past and present, then that in the past by increasing the content of formaldehyde tried to strengthen the resin is not very high quality raw materials, in hopes of hardness due to particle boards. Meanwhile, today's extremely high level of advanced manufacturing processes and environmental requirements for properties products. However proizvodchiki our products, as well as their foreign counterparts, certify products produced by the international regulations, as in quality control and to protect the natural environment.

Sandblasting – cold surface abrasive treatment of stone, glass, metal products, by damaging the surface of sand or other abrasive powder, spray air flow, while waterjet processing – a jet of water or other liquid. For the first time an American patented by Benjamin Chew Tilgmanom (1821-1901) in 1870. Sandblasting can get a picture of any complexity, until playback pictures. The prepared image is printed on transparent film. Then figure is applied to a special film, glued to the glass surface and cured under UV light, which causes hardening of the exposed sunny areas. Unexposed areas thoroughly wash and get a stencil for printing. Abrasive dust under the pressure of compressed air is fed through a nozzle onto the surface glass and in contact with a glossy surface, it coarsens and destroys, knocking out the glass with pieces of glass. With the help of photo-masks can produce multi-stage processing of glass, successively removing relevant parts of the templates.

The resulting mat this figure will have a different granularity and depth of processing. Sandblasting glass or mirror is one of the finest and very interesting design decisions interior. After drawing, the image is not erased, is not washed off, it stays forever. After sandblasting the glass or mirror, the figure already does not look graphically, and volume. If you want the glass was opaque, can be from one side of the glass mat design, and leave the background transparent, but on the other hand – on the contrary. Figure acquire depth and expressiveness, sand-blasted glass over it does not seen.

Now everyone wants to make his home was unique and not like the others, to create a unique design will help sandblasting glass. It is used in sandblasting manufacture of office partitions, stained glass, mirrors with decorative trim, glass table tops with patterned, glass for interior doors, furniture fronts, etc. Drawing on the artistic compositions mirror cloth led to a deeper approach to interior designers. Unique features of sandblasting – a variety of unique, original interiors, with details of the glass can be as basic in product bearing the main idea of the plan, and act as connecting elements or inserts, giving the product elegance and originality. All-glass door closets or walls made such a way to decorate any interior. Make it functional and, at the same time, visually increase the space, creating a feeling of lightness and freedom. can offer you a wide selection of etched glass patterns.

Live in a modern beat, as you know, not just – constant traffic jams, rush hours, the endless crowds, strained nerves … All of this brings forth so much that when he got home, so you want to remove yourself from the heavy burden of the modern metropolis and immersed in a paradise of domestic comfort and warmth, enjoying the tranquility and socializing with friends. Order Furniture One of the main roles played by the furniture. And no wonder, because what could be better than enjoying a cup of hot, coffee, drowning in endless bliss soft and comfortable chairs and pleasant to the touch leather upholstery, which was created exclusively for you? Order furniture. Qualitatively, the interior was built – one of the important components style of the house. A home comfort – a pledge of family happiness and prosperity. Therefore, the choice most suitable for you furniture, we recommend you approach with care. Before you buy from us the best furniture in your life Imagine how it will fit into your decor.

Colours, materials, level of strength, location – all important factors that you should not forget, if you want to turn the four walls of home ray.Zakaz real furniture. Comfortable, beautiful, stylish, reliable – upholstered furniture is not only the most important element of comfort, but also perfectly underlines the original, exclusive and, in some places, aristocratic style owner. Your furniture can also be like and pets, who are willing to make the company the comfort side. Choosing furniture, many often wonder about the justification for investment. Will purchased furniture to serve long as it fits perfectly into the room, would be safe for children. Choosing the pieces of your home personal heaven for us, you can be assured of quality and durability of the acquisition. In addition, You can always choose a furniture on taste, price and size!